We recommend reglazing when a color change or super high gloss finish is desired on the tub, sink, countertop or tile wall.
This is an economical way to have the look of a new surface without the big bucks to replace it.
We use top of the line coatings – the same ones used on Boeing jets. They’re designed for endurance if properly cared for. This process takes about 3 to 4 hours to apply and a 36 hour drying time. A refinished tub usually lasts from 10-12 years and can last for up to 15 years. We can coat many surfaces including fiberglass, porcelain, or cast iron tubs.
Benefits of Bathroom Reglazing
- It costs less. While the cost of a new tub may be cheaper, that cost will surge with the addition of installation, plumbing, and tiling charges.
- It takes very little maintenance. You simply have to wash the tub once per week.
- It does not take a lot of time, so you won’t be without your tub for too long.
The most important part of the reglazing process is the preparation of the surface. The tub, sink or shower must be thoroughly cleaned with a chemical solution, in order to remove residue such as soap scum and body oils, from the surface. If these are not stripped away, then the finishing job will not look as shiny and clean as it should.
After the surface has been cleaned, the next step is to do any necessary repairs. That involves patching-in dents, chips, and surface cracks with polyester filler. The scratches and nicks are sanded before being filled. Once all the repairs are complete, the bathtub, sink or shower is given a final cleaning using a solvent. Finally, the surface is sprayed with a primer, before the finishing coat is applied.
A professional refinishing generally takes between 3-4 hours, depending on the surface. Your tub, sink or shower will be ready for use within 36 hours.
IF YOU’RE READY TO LET US PERFORM A LITTLE MAGIC FOR YOU, CALL 1.800.434.9882 NOW FOR A FREE QUOTE OR FILL OUT THE CONTACT FORM.